Thyristor (inductive load) of OR-M302X(L)_OR-M305X(L)_OR-M307X(L) -EN-V2

1. Features

(1) High isolation voltage between input and output (Viso:3750 V rms)

(2) 4pin non zero-cross optoisolators triac driver output

(3) High repetitive peak off-state voltage VDRM :

M302X: Min. 400V, M305X: Min. 600V, M307X: Min. 800V

(4) High critical rate of rise of off-state voltage dv/dt :

M302X: Typ. 100V / μs ,M305X/M307X:MIN . 1000V / μs

(5) Tape and reel packaging.

(6) Operating temperature -40 ℃to +110 ℃

(7) Safety approval

UL approved(No.E323844)

VDE approved(No.40029733)

CQC approved (No.CQC19001231256 )

(8) In compliance with RoHS, REACH standards

(9) MSL Class Ⅰ

2. Description

The OR-M302X(L)/M305X(L)/M307X(L) consists of a non zero crossing photo triac, optically coupled to a gallium arsenide infrared emitting diode. They are housed in the SOP-4 package and guarantees insulation thickness.Therefore,they meets the reinforced insulation class requirements of international safety standards.

3. Application Range

•AC Motor Drives

•AC Motor Starters

•Static power switch

•Lighting Controls

•Solenoid/Valve Controls

•Solid StateRelays

•Temperature Controls

4. Functional Diagram

6. Electrical Optical Characteristics at Ta=25°C

*1.Test voltage must be applied within dv/dt rating.

*2. This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only.

*3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT . Therefore,recommended

operating IF lies between max IFT , 30 mA for OR-M3020 and OR-M3050,15 mA for OR-M3021 and OR-

M3051,10 mA for OR-M3022 and OR-M3052,5 mA for OR-M3023 and OR-M3053,3.5 mA for OR-M3024 and

OR-M3054, and absolute max IF (50mA).