Thyristor (inductive load) of OR-M304X(L)_OR-M306X(L)_OR-M308X(L) -EN-V0

1. Features

(1) High isolation voltage between input and output (Viso:3750 V rms)

(2) 4pin non zero-cross optoisolators triac driver output

(3) High repetitive peak off-state voltage VDRM :

M302X: Min. 400V, M305X: Min. 600V, M307X: Min. 800V

(4) High critical rate of rise of off-state voltage dv/dt :

M302X: Typ. 100V / μs ,M305X/M307X:MIN . 1000V / μs

(5) Tape and reel packaging.

(6) Operating temperature -40 ℃to +110 ℃

(7) Safety approval

UL approved(No.E323844)

VDE approved(No.40029733)

CQC approved (No.CQC19001231256 )

(8) In compliance with RoHS, REACH standards

(9) MSL Class Ⅰ

2. Description

The OR-M304X(L)/M306X(L)/M308X(L) each consist of a GaAs infrared emitting diode optically coupled to a monolithic silicon zero voltage crossing photo triac.They are designed for use with a discrete power triac in the interface of logic systems , such as solid-state relays, industrial controls, motors, solenoids and consumer appliances.

3. Application Range

•AC Motor Drives

•AC Motor Starters

•Static power switch

•Lighting Controls

•Solenoid/Valve Controls

•Solid StateRelays

•Temperature Controls

4. Functional Diagram

6. Electrical Optical Characteristics at Ta=25°C

*1.Test voltage must be applied within dv/dt rating.

*2. This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only.

*3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT . Therefore,recommended operating IF lies between max IFT ,30 mA for OR-M3040 and OR-M3060 and OR-M3080,15 mA for OR-M3041 and OR-M3061 and OR-M3081,10 mA for OR-M3042 and OR-M3062 and OR-M3082,5 mA for OR-M3043 and OR-M3063 and OR-M3083, 3.5 mA for OR-M3044, OR-M3064 and OR-M3084, and absolute max IF (50mA).

 

7. Package Dimension