Thyristor (inductive load) of OR-MOC302X(L)_OR-MOC305X(L)_OR-MOC307X(L) -EN-V2

1. Features

(1) High isolation voltage between input and output (Viso:5000 V rms )

(2) 6pin non-zero-cross optoisolators triac driver output

(3) High repetitive peak off-state voltage VDRM :

(4) OR-MOC302X: Min. 400V;OR-MOC305X: Min. 600V;OR-MOC307X: Min. 800V

(5) High critical rate of rise of off-state voltage( dV/dt : MIN. 1000V / μs)

(6) Have Dual-in-line package;Wide lead spacing package and Surface mounting package .

(7) Operating temperature -40 ℃ to +110 ℃

(8) Safety approval

UL approved(No.E323844)

VDE approved(No.40029733)

CQC approved (No.CQC19001231480 )

(9) In compliance with RoHS, REACH standards

(10) MSL Level 1 

2. Description

The OR-MOC302X(L)/305X(L)/307X(L) series of devices each consist of a GaAs infrared emitting diode optically coupled to a monolithic silicon non zero voltage crossing photo triac.They are designed for use with a discrete power triac in the interface of logic systems , such as solid-state relays, industrial controls, motors, solenoids and consumer appliances.

3. Application Range

•AC Motor Drives

•AC Motor Starters

•Static power switch

•Lighting Controls

•Solenoid/Valve Controls

•Solid StateRelays

•Temperature Controls

5. Electrical Optical Characteristics at Ta=25°C

*1.Test voltage must be applied within dv/dt rating.

*2. This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only.

*3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT . Therefore,recommended operating IF lies between max IFT ,30 mA for OR-M3040 and OR-M3060 and OR-M3080,15 mA for OR-M3041 and OR-M3061 and OR-M3081,10 mA for OR-M3042 and OR-M3062 and OR-M3082,5 mA for OR-M3043 and OR-M3063 and OR-M3083, 3.5 mA for OR-M3044, OR-M3064 and OR-M3084, and absolute max IF (50mA).

 

6. Package Dimension