Home PRODUCTS Optocoupler Darlington Optocoupler Darlington Optocoupler ORPC-852-EN-V3

PRODUCTS

New Products

Darlington Optocoupler ORPC-852-EN-V3

ORPC-845 series optical coupler consists of four infrared emitting diodes and four optically to a photo Darlington detector.

Send Inquiry

Product Description

high speed optocouplers

high speed optocouplers

Features

High collector- emitter voltage (V CEO = 350V)
High current transfer ratio ( CTR : MIN. 1000% at IF = 1mA, VCE = 2V )
High isolation voltage between input and output (Viso = 5000 Vrms)
In compliance with RoHS, REACH standards
Safety approval
UL approved (No.E323844) VDE approved(No.40029733)

CQC approved (No.CQC09001029446)

Description
The OR-852 series devices consist an infrared emitting diodes, optically coupled to a high voltage photo Darlington detector.
The devices are in a 4-pin DIP package and available in wide-lead spacing and SMD option.

Darlington Optocoupler ORPC-852-EN-V3

Applications

Telephone set,telephone exchangers
System appliances,measuring instruments
Sequence controllers
Signal transmission between circuits of different potentials and impedances

Absolute Maximum Ratings at Ta=25℃

Parameter		Symbol	Rated Value	Unit
Input	Forward Current	IF	60	mA
	Peak forward current(100μs pulse, 100Hz frequency)	IFP	1	A
	Reverse Voltage	VR	6	V
	Power dissipation	PD	60	mW
Output	Collector and emitter Voltage	VCEO	350	V
	Emitter and collector Voltage	VECO	0.1	V
	Collector Current	IC	150	mA
	Consume Power	PC	150	mW
Total Power Dissipation		Ptot	200	mW
*1 Isolation Voltage		Viso	5,000	Vrms
Operating Temperature		Topr	-50 to + 110	℃
Storage Temperature		Tstg	-55 to + 125
*2 Soldering Temperature		Tsol	260

AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
Short between anode and cathode on the primary side and between collector and emitter on the secondary side.
The isolation voltage tester with zero-cross circuit shall be used.
The waveform of applied voltage shall be a sine wave.
For 10 Seconds

Electro-Optical Characteristics (Ta=25℃ unless specified otherwise)

Parameter		Symbol	Min	Typ.*	Max	Unit	Condition
Input	Forward Voltage	VF	---	1.2	1.4	V	IF=10mA
	Reverse Current	IR	---	---	5	µA	VR= 5V
	Collector capacitance	Ct	---	30	250	pF	V=0, f=1KHz
Output	Collector to emitter Current	ICEO	---	---	100	nA	VCE=200V, IF=0mA
	Collector and Emitter attenuation Voltage	BVCEO	350	---	---	V	IC=0.1mAIF=0mA
	Emitter and Collector attenuation Voltage	BVECO	0.1	---	---	V	IE=0.1mAIF=0mA
Transforming Characteristics	*1 Current conversion ratio	CTR	1000	---	15000	%	IF=1mA, VCE=2V
	Collector Current	IC	10	---	150	mA	IF=1mA, VCE=2V
	Collector and Emitter Saturation Voltage	VCE(sat)	---	---	1.2	V	IF=20mA IC= 100mA
	Insulation Impedance	Riso	5×1010	1×1012	---	Ω	DC500V40~60%R.H.
	Floating Capacitance	Cf	---	0.6	1.0	pF	V=0, f=1MHz
	Cut-off Frequency	fc	---	6	---	kHz	VCE=5V, IC=2mA RL=100Ω, -3dB
	Rise Time	tr	---	40	---	μs	VCC=10V, IC=10mA,RL=100Ω
	Descend Time	tf	---	15	---	μs
	Turn-On Time	ton	---	50	---	μs
	Turn-Off Time	toff	---	15	---	μs

*1 Current Conversion Ratio = IC / IF × 100%, CTR Tolerance:±3%.

Order Information

Part Number

ORPC-852T-W-X-Y-Z

Note

T = Lead form option (S, M or none)

W = Tape and reel option (TP,TP1 or none). X = Lead frame option (F: Iron, C:copper)

Y = ‘V’ code for VDE safety (This options is not necessary).

Z = ‘G’ code for Halogen free (This options is not necessary).

VDE Code can be selected.
Halogen Free can be selected.

Option	Description	Packing quantity
None	Standard DIP-4	100 units per tube
M	Wide lead bend (0.4 inch spacing)	100 units per tube
S(TP)	Surface mount lead form (low profile) + TP tape & reel option	2000 units per reel
S(TP1)	Surface mount lead form (low profile) + TP1 tape & reel option	2000 units per reel

Naming Rule

Darlington Optocoupler ORPC-852-EN-V3

1. Manufacturer : ORIENT.
2. Part Number : 852.
3. Lead frame Code ：‘F’ means Iron，‘C’ means Copper.
4. Year Code ： '1' means '2021' and so on.
5. Week Code ： 01 means the first week, 02 means the second week and so on.
6. Day Code ： ‘A to F’ means ‘Monday to Sunday’.
7. VDE Code . (Optional)
8. HF Code : Halogen Free. (Optional)
9. Anode.
  - Halogen Free Mark can be selected.
  - VDE Mark can be selected.

Description	Symbol	Dimension in mm (inch)
Tape wide	W	16±0.3 (.63)
Pitch of sprocket holes	P0	4±0.1 (.15)
Distance of compartment	F	7.5±0.1 (.295)
Distance of compartment	P2	2±0.1 (.0079)
Distance of compartment to compartment	P1	8±0.1 (.472)

Package Type	TP/TP1
Quantities(pcs)	2000

Package Dimension

DIP Type

Packing Information
Packing type	Tube
Qty per Tube	100pcs
Small box (Inner) Dimension	52512860mm
Large box (Outer) Dimension	545290335mm
The Amount per Inner Box	5,000pcs
The Amount per Outer Box	50,000pcs

SOP Type

Packing Information
Packing type	Reel type
Tape Width	16mm
Qty per Reel	2,000pcs
Small box (inner) Dimension	34534558.5mm
Large box (Outer) Dimension	620x360x360mm
Max qty per small box	4,000pcs
Max qty per large box	40,000pcs

Packing Label Sample

Darlington Optocoupler ORPC-852-EN-V3

Note：

Material Code :Product ID.
P/N :Contents with "Order Information" in the specification.
Lot No. :Product data.
D/C :Product weeks.
Quantity :Packaging quantity.
Reliability Test

Temperature Profile Of Soldering

(1).IR Reflow soldering (JEDEC-STD-020C compliant)

One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times.

Profile item	Conditions
Preheat Temperature Min (T Smin ) Temperature Max (T Smax ) - Time (min to max) (ts)	150˚C 200˚C 90±30 sec
Soldering zone - Temperature (TL ) - Time (t L )	217˚C 60 sec
Peak Temperature	260˚C
Peak Temperature time	20 sec
Ramp-up rate	3˚C / sec max.
Ramp-down rate from peak temperature	3~6˚C / sec
Reflow times	≤3

Darlington Optocoupler ORPC-852-EN-V3

(2).Wave soldering (JEDEC22A111 compliant)

One time soldering is recommended within the condition of temperature.

Temperature Time	260+0/-5˚C 10 sec
Preheat temperature Preheat time	25 to 140˚C 30 to 80 sec

Darlington Optocoupler ORPC-852-EN-V3

(3).Hand soldering by soldering iron

Allow single lead soldering in every single process. One time soldering is recommended.

Temperature

380+0/-5˚C

Time

3 sec max